Roll

Check our In-house Equipment List

One-stop solution from material and specification selection to line compatibility testing.

  • Vacuum Pump
    • Dryer Type
    • Waterring Type
  • Vacuum Pressure

    0 ~ 0.1 Mpa

  • Solution
    • Water
    • Oil
    • Solvent
  • Line Speed

    1.0 ~ 200 mpm

  • High-Temperature Sintering Abrasion Testing Equipment
    • Temperature: Max 1450°C
    • Air Pressure: 0 – 0.2 MPa
    • Rotation Speed: 0 – 1680 rpm
  • Ambient-Temperature Abrasion Testing Equipment
    • Air Pressure: 0 – 0.1 MPa
    • Rotation Speed: 0 – 1750 rpm
  • Universal Testing Machine

    Compression test, tensile strength test, compression and recovery test

  • Digital Microscope

    50× – 1200×

  • High-Frequency Induction Melting Furnace

    Max 1600℃

  • Test Drying Oven

    Small Furnace: 1050°C / Medium&Large Furnace: 1450°C

  • Test Drying Oven

    Max 300℃

  • Tapped Density Tester

    100㎖, 250㎖

Check HOTANI's Research and Development Equipment

In collaboration with HOTANI Co., Ltd. in Japan, we provide comprehensive BRUSH testing services using specialized testing equipment.

  • Features
    • Brush Roll Inlet Count : 1 Roll
    • Brush Roll Speed : 120 ~ 1,500 rpm
    • Compression Amount : 0.1 ~ 3.0 mm
  • Brush Rotation Direction

    Forward, Reverse

  • Line Speed

    1.0 ~ 400 mpm

  • Brush Spray

    Alkaline solution, ambient temperature water, hot water (cannot be used simultaneously)

  • Image

Representative Grinding Tester Test Examples

By replicating the actual line conditions in the laboratory, the product's performance can be accurately assessed.

Stainless H-APL C-APL
View Test Certificate Data Sample (PDF)
  • Features
    • Brush Roll Inlet Count : Up to 8 Brushes
    • Brush Roll Speed : 120 ~ 1,800 rpm
    • Compression Amount : 0.1 ~ 3.0 mm
  • Brush Rotation Direction

    Reverse

  • Line Speed

    1.0 ~ 1,000 mpm

  • Brush Spray

    Alkaline solution, ambient temperature water, hot water

  • Image

Representative Test Examples for High-Speed Cleaning Tester

By replicating the actual line conditions in the laboratory, the product's performance can be accurately assessed.

General Steel CGL
View Test Certificate Data Sample (PDF)

FAQ

  • Is it possible to quantitatively assess the scale removal performance of the brush roll?
  • Can steel sheets undergo a pickling test?
  • Can the whiteness of steel sheets be checked under the same conditions as the actual pre-treatment line?
  • Is it possible to accurately measure the amount of residual liquid left on the steel sheet surface after roller processing?
  • Are wear tests at both room and high temperatures available for ceramic rolls?
  • Can the material be calcined and then tested with different rollers for pulverization?
  • Can changes in the material’s physical properties be identified through high-temperature calcination tests?
  • Is stress analysis and strength evaluation available for various rolls and components?
Yes, we can fully accommodate all of your inquiries.